Lift Table Power Units 3 hydraulic power pack

designed exclusively for small and medium lift table The lowing movement is activated by the solenoid valve

This power unit is designed exclusively for small and medium lift table, which consists of high pressure gear pump, AC motor, multi-functional manifold, valve, tank, and etc. The lowing movement is activated by the solenoid valve with the speed controlled by the balance valve.

Special Notes1. The duty of this power unit is S3, I. E., which can be only be worked uninterruptedly, I. E., 1 minute on and 9 minutes off.2. Clean all the hydraulic parts concerned before mounting the power unit3. The viscosity of the hydraulic oil should be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended.4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.5. The power unit should be mounted horizontally.

Model	Motor Volt	Motor Power	Rated Speed	Displacement	System Pressure	Tank Capacity	Length (mm)
HPU-F1.6B3G2/LCABD1	220VAC	1.5KW	2800 RPM	1.6ml/r	20MPa	6L	629
HPU-E2.1B3G2/LCAED1				2.1ml/r	16MPa	6L	629
HPU-E2.5C3G2/LCAED1				2.5ml/r	12MPa	8L	699
HPU-F2.1C4H2/LCAED1	380VAC	2.2KW		2.1ml/r	20MPa	8L
HPU-E2.5D4H2/LCABD1				2.5ml/r	16MPa	10L	769
HPU-E2.7E4H2/LCAED1				2, 7ml/r	15MPa	12L	869

 

Lift Table Power Units 3 hydraulic power pack